Table of Contents
Advertisement
2
Select [ON]/[OFF] and press
The Sub-address is set.
To place a call by specifying a sub-address
In the stand-by display, enter a phone number +
or
(V.phone).
●
Even if the Sub-address is set to ON, " " is not recognized as the sub-address separator
but as part of a phone number in the following cases: where it is at the beginning of a phone
number and immediately after a number entered using Prefix/Int'l prefix/Country code of the
Option call display for placing a call.
Setting the Alarm When Reconnecting a Dropped Call
This function automatically reconnects the call interrupted during a voice,
videophone, or PushTalk call due to the radio wave condition, such as in a tunnel or
between buildings, right after the radio wave condition is recovered. You can set an
alarm tone when a call is reconnected.
1
From the Menu, select [Settings] → [Call] → [Call setting] → [Recnct ALM]
and press
[High] : Sound the high alarm tone.
[Low] : Sound the low alarm tone.
[OFF] : Do not sound the alarm tone.
2
Select the type of the alarm tone and press
The alarm tone during reconnection is set.
●
The recipient does not hear any sound while the radio wave is interrupted.
●
The time required for reconnection depends on the usage and radio wave condition. The
average reconnection time is about 10 seconds and the caller is charged for the time spent
for reconnection.
Improving Voice Clarity by Suppressing Background Noise
You can suppress background noise during a voice or videophone call or during
playing back an answering message set for the record message.
1
From the Menu, select [Settings] → [Call] → [Call quality] → [Reduce noise]
and press
[ON] : Suppress background noise.
[OFF] : Do not suppress background noise.
2
Select [ON]/[OFF] and press
The Reduce noise is set.
Talking Hands-free While Driving
You can place or receive a voice call using a hands-free device by connecting the
FOMA terminal to a device such as the In-Car Hands-Free Kit 01 (optional) or car
navigation system.
For details about the operation of the hands-free device, see the user's manual of the
device. When you use the In-car Hands-free Kit, you need the FOMA In-Car Hands-
Free Cable 01 (optional).
64
.
.
.
+ sub-address and press either
.
.
<Reconnect alarm>
<Reduce noise>
<Hands-free mode>
Advertisement
Chapters
Table of Contents
