Sony Ericsson FOMA SO905iCS Manual page 362

4
From the Data Box, select a category → a
folder → a file and press
The Edit mail display appears.
For a still image recorded when the Auto orientation
is set to [ON]
The screen for confirming whether to rotate the
still image to align the display direction of the
FOMA terminal appears. To post a rotated image,
select [Matching&BlogUp]. When the image size
exceeds [VGA(640×480)], the size of the image
is automatically reduced to [VGA(H640×W480)]
or [VGA(W640×H480)] depending on which
orientation the original image is, landscape or
portrait.
To post an image as is, select [Keeping&BlogUp].
For a still image exceeding [VGA(640×480)]
The screen for confirming whether to reduce the
image size to [VGA(640×480)] appears. To post
a reduced image, select [Reduces&BlogUp].
To post an image as is, select [Keeping&BlogUp].
 When you select a still image exceeding 2M
bytes, the still image is not attached because
of the size restriction of the mail attachment
file.
For a movie exceeding 2M bytes
A movie is automatically clipped to be less than
2M bytes from the beginning.
To select a still image or movie in the microSD
memory card
From the microSD category list, select a category
→ a file.
5
Enter texts and press
Mail is sent and it is posted on a blog.
● When 2in1 is set to the B mode, you cannot
compose any i-mode mail.
● You cannot send i-mode mail using Address B.
Browsing a Blog
Example: Browsing a blog using i-mode
 When a blog service has neither the i-mode URL nor
the Full Browser URL specified, you cannot select
the blog service.
1
From the Menu, select [Imaging] → [easy
BlogUp] and press
The blog service list appears.
2
Select a blog service and press
(i-mode).
The screen for confirming whether to connect to
i-mode appears.
360
.
(Send).
.
3
Select [Yes] and press
The selected blog is displayed.
To browse a blog using Full Browser
Move the cursor to a blog service, press
Brs), and select [Yes].
Starting the Alarm at a
Specified Time
The alarm is activated for about one minute at
a specified time. You can set up to 12 alarms
to be activated.
1
From the Menu, select [LifeKit] → [Alarm]
and press .
Ａｌａｒｍ
Ｓｅｌｅｃｔ ａｌａｒｍ
Ａｕｔｏ ｐｏｗｅｒ ｏｎ
ＯＦＦ
To set the operation of the alarm during power off
Select [Auto power on] → [ON]/[OFF].
 If you select [ON], when the alarm time
comes during power off, the FOMA terminal
is automatically powered on and the alarm
works.
2
Select [Select alarm] and press
Ｓｅｌｅｃｔ ａｌａｒｍ
１０：００ Ｅｙｄ
１１：３０ Ｅｙｄ
１２：００ Ｅｙｄ
１３：３０ Ｅｙｄ
１４：００ ＯＦＦ
１６：００ Ｄａｙ
１８：３０ Ｄａｙ
００：００ ＯＦＦ
００：００ ＯＦＦ
００：００ ＯＦＦ
００：００ ＯＦＦ
００：００ ＯＦＦ
 The following icons show the setting status of the
Alarm.
The Alarm is set
The Snooze is set
To switch between setting/canceling the Alarm
Move the cursor to the Alarm and press
(Rel.).
.
(Full
<Alarm>
.
(Set)/