Sony Ericsson FOMA SO905iCS Manual page 200

Setting Whether to Use the
Saved Data for Flash Movies
You can set whether to use the saved data
(P.190) when you play back a Flash movie
displayed on a site or saved in the Screen
Memo.
1
From the i-mode menu, select [i-mode
setting] → [Use phone info] and press
.
2
Select [Yes]/[No] and press
The Use phone info is set.
Disabling the Display of Graphics
You can set whether to display graphics when
displaying sites or screen memos.
1
From the i-mode menu, select [i-mode
setting] → [Display img] and press
2
Select [ON]/[OFF] and press
The Display img is set.
When set to [OFF], "
graphic.
●
Some graphics may not be displayed correctly
even if the Display img is [ON].
Displaying a Site Automatically
with the Correct Character Code
You can set to identify the character code of a
site automatically.
1
From the i-mode menu, select [i-mode
setting] → [Auto detect.] and press
2
Select [ON]/[OFF] and press
The Auto detect. is set.
● Even if the Auto detect. is [ON], some sites may
not be displayed correctly.
198
.
.
.
" is displayed instead of a
.
.
Operating the SSL List
You can set to validate/invalidate the certificate
that is required to connect to an SSL site.
1
From the i-mode menu, select [i-mode
setting] → [SSL list] and press
ＳＳＬ ｌｉｓｔ １３
ＣＡ ｃｅｒｔ． １
ＣＡ ｃｅｒｔ． ２
ＣＡ ｃｅｒｔ． ３
ＣＡ ｃｅｒｔ． ４
ＣＡ ｃｅｒｔ． ５
ＣＡ ｃｅｒｔ． ６
ＣＡ ｃｅｒｔ． ７
ＣＡ ｃｅｒｔ． ８
ＣＡ ｃｅｒｔ． ９
ＣＡ ｃｅｒｔ．１０
ＣＡ ｃｅｒｔ．１１
ＤｏＣｏＭｏ ｃｅｒｔ．１
[CA cert.]:
An authentication company issues these
certificates. They are saved in the FOMA terminal
at the time of purchase.
[DoCoMo cert.]:
This certificate is required for connecting to the
FirstPass Center and FirstPass-compatible sites
and is saved on the UIM (green/white).
[User cert.]:
This certificate is downloaded from the FirstPass
Center by [User certificate] and is saved in the
UIM (green/white).
To check the certificate
Move the cursor to the certificate and press
2
Select an SSL certificate and press
(Set).
The Security code screen appears.
3
Enter the Security code and press
(OK).
The Valid/Invalid display appears.
4
Select [Valid]/[Invalid] and press
The SSL certificate is set.
When set to [Invalid], " " changes to " ". The SSL
communication is canceled when connecting to an
SSL site that requires a certificate.
<SSL certificate>
.
.
.