Sony Ericsson FOMA SO905iCS Manual page 402

Menu
item
Set call/ To identify the call placed or received using
receive Number B, set the font color and ring tone of
No. the incoming/receiving call display.
● Set the font color
Select [Set call/receive No.] → [Disp. call/rcv.
No.] → [dark]/[light].
● Set the ring tone
Select [Set call/receive No.] → [Ringtone
for Number B] → [Incoming call]/[Incoming
V.phone] → a r ing tone from MUSIC/
i-motion/Melody of the Data Box.
 You can set the following files.
Category File format File size Image size
MUSIC※ AAC-LC/
i-motion※ MP4
Melody
※ Some files may not be set.
 If you select [ON] at [Link incoming call],
the ring tone for the Incoming V.phone
follows the setting for the Incoming call.
 When you receive a call without the caller
ID, the ring tone follows the setting of
[Ringtone for Number B].
2in1 Quit using the 2in1 functions.
function Select [2in1 function OFF] → [Yes].
OFF
Receive Set the restriction for incoming call of Number
avoid. A and Number B.
● Set the restriction for incoming call for
setting
Number A and Number B individually
Select [Receive avoid. setting] → [Change
receive avoid.] → [Rcv. avoid. (Number
A)]/[Rcv. avoid. (Number B)] → [Receive]/
[Avoid]/[Unchange] →
● Check the current setting
Select [Receive avoid. setting] → [Check
receive avoid.] → [Yes].
● Activate/deactivate the Mode link
When the A mode is used, allow to receive
a call only for Number A. When the B mode
is used, allow to receive a call only for
Number B. When the Dual mode is used,
allow to receive a call for both Number A
and Number B.
Select [Receive avoid. setting] → [Mode link
setting] → [Yes].
 When the Mode link setting is set to
"Activate", you cannot change the mode
while the FOMA is outside of the service
area.
● S e t t h e R e c e i v e a v o i d . s e t t i n g f ro m
overseas
Select [Receive avoid. setting] → [Rcv.
avoid. set(Int.)] → Operate as instructed by
the guidance.
400
Operation
Max. 5M
HE-AAC bytes
Max. 10M Max. [VGA
bytes (640×480)]
SMF/ Max. 350K
MFi bytes
(Complete).
Selecting a Phone Number
When Placing a Call
When the Dual mode is set, you can select a
phone number to place a call.
1
Enter a phone number in the stand-by
display and press
To place a videophone call
Press
ドコモ次郎
Ｓｅｌｅｃｔ ｎｕｍｂｅｒ
ｔｏ ｃａｌｌ
Ｎｕｍｂｅｒ Ａ
−
Ｎｕｍｂｅｒ Ｂ
Ｃａｎｃｅｌ
2
Select [Number A]/[Number B] and press
−
.
Place a call from the selected phone number.
● When you place a call using the Redial/Received
record, the phone number which was used to
receive/place a call previously is displayed and
the call is placed using this phone number.
.
(V.phone).