Before Using The Camera - Sony Ericsson FOMA SO905iCS Manual

Before Using the Camera

You can record images using the built-in camera, and you can send them by
attaching to i-mode mail, posting on a blog, setting for the stand-by display, and so
on.
When you save an image to the microSD memory card, you can also select a mode
to save a replicated image of smaller size in the FOMA terminal at the same time (P.178,
319).
To use the microSD memory card, you need to obtain a microSD memory card
separately. If you do not have a microSD memory card, you can purchase one at a
home electric appliance store or other similar store (P.306).
 The image recorded by the camera may differ from actual color or brightness of object.
About Using the Camera
Notes Before Using the Camera
 Clear images cannot be obtained if the camera lens is stained with fingerprints or grease. Wipe
the camera with a soft clean cloth before recording an image.
 Leaving the FOMA terminal in a place exposed to direct sunlight or high temperature for a long
period of time may deteriorate the image quality.
 You cannot start the Camera mode when the battery level is very low. To use the camera,
charge the battery sufficiently.
 The Camera mode may not be activated when the FOMA terminal is charged electrostatically.
 When you post or send an image recorded by the camera, it is at your own risk to decide
whether or not to share your location information attached to the image. If you do not want to
send location information, set the Auto attach loc. info to [OFF] (P.171).
Notes on Using the Camera
 To prevent shaking, hold the FOMA terminal firmly or place it on a stable place and use the
Auto timer when recording.
 When you try to record a strong light source directly, such as the sun or a lamp, the screen may
black out or the image on the screen may be distorted.
 The camera is manufactured based on the leading edge technologies. Nevertheless, black and
bright points or lines may appear constantly in the display. Additionally, increased noise may
appear as white lines when recording in a low-light environment. These are not malfunctions.
 When the battery level becomes very low in the Camera mode, the Camera mode is terminated.
About the Camera Mode
To use the camera, slide the lens cover to open in the stand-by display or menu
display. The camera activation sound is heard, the Camera mode is activated, an
image through the camera lens appears in the display, and the Auto timer indicator is
turned on.
To terminate the Camera mode, close the lens cover.
 You can also activate the Camera mode by pressing
150
for over a second in the stand-by display.