Protecting Your Mobile Phone From Harmful Data; Scan Function - Sony Ericsson FOMA SO905iCS Manual

Protecting Your Mobile Phone from Harmful Data

At first, update the pattern definitions to get the latest definitions.
You can detect information related to the data and programs obtained into the FOMA
terminal from an external source, such as data downloaded from a site or i-mode
mail, and delete data or end the start-up of application that can cause a trouble.
 Use the pattern definitions for checking. Since the pattern definitions are upgraded every time
a new problem is discovered, be sure to update the definitions (P.463).
 The scanning function provides explicit protection against intrusive data that causes mobile
phone trouble while you are viewing a website or receiving mail. Note that if the pattern
definitions corresponding to each trouble are not downloaded to the mobile phone, or if there
are no pattern definitions corresponding to each trouble, this function cannot prevent the
trouble occurrences.
 The contents of the pattern definitions vary depending on the model of your mobile phone.
Note that the distribution of pattern definitions for models released more than three years ago
may be discontinued at our company's discretion.
Setting the Scanning Function
You can set whether to automatically check data and programs when they are
executed.
1
From the Menu, select [Settings] → [Management] → [Scan function] → [Set
scan] and press
Ｓｅｔ ｓｃａｎ
Ｓｃａｎ ｆｕｎｃｔｉｏｎ
Ｖａｌｉｄ
Ｍｅｓｓａｇｅ ｓｃａｎ
Ｖａｌｉｄ
2
Select [Valid] at [Scan function].
[Valid] : Execute the scanning function. If data that can cause a trouble is detected, a
warning is displayed in five levels.
[Invalid] : Do not execute the scanning function.
When you change the setting
Select [Yes].
3
Select [Valid] at [Message scan].
[Valid] : Execute the scanning function for the SMS. If a phone number or URL is included
in the mail main body, the message appears.
[Invalid] : Do not execute the scanning function for the SMS.
When you change the setting
Select [Yes].
462
.
[Scan function] : Set whether to enable the scanning function.
[Message scan] : Set whether to enable the scanning function for SMS
when the Scan function is set to [Valid].
<Scan function>