Sony Ericsson FOMA SO905iCS Manual page 168

3
Press
 Guide to show the recording direction
 Move the camera in the direction of the arrow.
 Number of recordable images
The frame of the image to be recorded next turns green.
 Number of the image to be recorded next counted from the beginning
 Thumbnail of the image recorded previously
 Camera orientation guide
 When you move the camera according to the guide, the green frame also moves along
with the movement of the camera. The frame turns red when the camera reaches the
spot for recording the next image.
4
Press
The composed panorama image is saved.
●
After the shutter sound is heard, do not move the camera while the message "Photographing.
Please keep for a while" remains displayed. Failure not to do so may cause the composed
image to be extremely compressed vertically or failure in composition.
● Once you press the shutter key to start recording a panorama image, the Shoot mode is not
terminated even if no operation is made for over two minutes.
Recording an Image Using the High Sensitivity Mode
You can record an image beautifully by reducing the blurring of an object under low-
light condition or in a dark room without using the flash.
 The image size which can be recorded using the High sensitivity is [QCIF(176×144)],
[QVGA(240×320)], [VGA(640×480)], [Stby(480×864)], or [1M(1280×960)].
 When you set the Shoot mode to [High sensitivity] while the image size is [2M(1632×1224)] or
more, the image size is changed to [1M(1280×960)].
 When you set the Shoot mode to [High sensitivity], the Flash is temporarily set to [OFF] and the
Select scene is set to [AUTO]. The setting of the Select scene cannot be changed.
1
Press
[ ] (High sensitivity), and press
166
.
The first image is recorded with the shutter sound. Keep
the FOMA terminal horizontally and slowly move it in
either direction left or right. When you move the camera

with the help of the green-framed camera orientation
guide and once bring it to the spot for recording the next

 image, the frame turns red and the next image is recorded
 automatically with the shutter sound.

After recording the last image, all images are composed
into one image and the entire image is displayed. Press
the image.
To stop recording
(Save).
(Func) in the Camera mode display, select [
to scroll the display to check the hidden portions of
Press (Stop). If the screen for confirming whether to
compose the images appears, select [Activate]/[Erase
photo].
.
] (Shoot mode) →