Sony Ericsson FOMA SO905iCS Manual page 520

4
Enter a dummy (nonexistent) phone number (such
as "0") at [電話番号], select [FOMA SO905iCS] at
[接続方法], and click [OK].
The connection window appears.
5
Click [キャンセル].
Enter a host (APN) and press .
6
Input format
AT+CGDCONT=<cid>, "PPP", "APN" 
Enter the registration number 2
or a number between 4 and 10.
If the AT command you entered is not displayed
Enter "ATE1 ".
When the host (APN) is set, "OK" appears.
7
Click the [ファイル] menu → [ハイパーターミナル
の終了].
Hyper Terminal ends.
 When the message "現在、 接続されています。 切断しても
よろしいですか？" (The line is connected. Are you sure
you want to disconnect?) appears, select [はい].
 When using Windows XP, the message ""XXX" と名前付
けされた接続を保存しますか？" (Do you want to save
the connection named "XXX"?) appears. You do not
need to save the connection.
 When using Windows 2000 Professional, the message
"セッションXXXを保存しますか？" (Do you want to save
session XXX?) appears. You do not need to save the
session.
To reset a host (APN)
Input format
AT+CGDCONT= (Reset all cid)
AT+CGDCONT=<cid> (Reset a specific cid only)
To display a current host (APN)
Input format
AT+CGDCONT?
Enclose the host name you
enter in double quotes.
19
Setting ON/OFF for the Notify Caller ID
The caller ID is important personal information.
Carefully decide whether you want to notify a recipient
of your caller ID.
 The caller ID must be notified when you use "mopera U" or "mopera".
1
Perform step 1 to 5 in "Host (APN) Setting" (P.18).
2
Set ON/OFF for the Notify caller ID during packet communication.
Input format
AT＊DGPIR=<n>
1: Add "184" (OFF).
2: Add "186" (ON).
If the AT command you entered is not displayed
Enter "ATE1".
When ON/OFF for the Notify caller ID is set, "OK" appears.
■ ON/OFF setting of a dial-up network
You can add 186 (ON)/184 (OFF) to a host number
even for a dial-up network setting (P.19).
When this setting is performed by both ＊DGPIR
command and dial-up network setting, the following
parameters are used.
Dial-up network setting
(when <cid>=3)
＊99＊＊＊3#
184＊99＊＊＊3#
186＊99＊＊＊3#
Dial-up Network Setting
When Using Windows XP
1
Click [スタート] → [すべてのプログラム] → [アク
セサリ] → [通信] → [新しい接続ウィザード].
The new connection window appears.
2
Click [次へ].
3
Select [インターネットに接続する] and click [次へ].
4
Select [接続を手動でセットアップする] and click [次へ].
5
Select [ダイヤルアップモデムを使用して接続する]
and click [次へ].
6
Put a checkmark in the checkbox of [モデム - FOMA
SO905iCS] and click [次へ].
 The window for selecting the device appears only when
there are several modems.
7
Enter any name at [ISP名] and click [次へ].
＊DGPIR command setting
No setting OFF ON
ON OFF ON
OFF
ON