Sony Ericsson FOMA SO905iCS Manual page 372

2
Select the item and press
● When you place a call to a toll-free number such
as NTT Free Dial or Directory Assistance (104),
＊＊＊＊＊＊
"0YEN" or "
charge.
● The accumulated call charges are stored in
the UIM. Therefore, if you switch the UIM, the
accumulated total call charge (starting from
December 2004) is displayed.
※ FOMA terminals manufactured earlier than the
901i series are not capable of displaying the
accumulated call charges stored in the UIM.
(The charges, however, are stored in the UIM
used by the older terminals.)
●
The duration and charge for PushTalk, i-mode,
and packet communication are not counted. For
details on how to check charges for i-mode, etc.,
see the "Mobile Phone User's Guide 【i-mode】
FOMA version" that you receive when you
subscribe to i-mode.
● When the call duration for the last voice call or
digital communication exceeds 99 hours, 59
minutes, and 59 seconds or the total call duration
for voice calls or digital communication exceeds
9,999 hours, 59 minutes, and 59 seconds, "Over"
is displayed.
●
The ring time for incoming and outgoing calls are
not counted.
●
The transmission charge for Chaku-moji is not
counted.
●
When you use WORLD CALL, the international
call charge is counted. When you use other
international call services other than WORLD
CALL, the call charge is not counted.
● When you switch between voice and videophone
calls during a call, the call duration and call
charge are counted separately for each call
type and incremented at [Voice call] or [Digital]
alternately every time you switch the call.
● When 2in1 is used, the total call duration and
charge of both Number A and Number B are
summed up and displayed.
370
.
YEN" indicated for the call
Resetting the Total Call Duration
and Charge
The display of the total call duration and
charge can be reset. The count starts from 0
after the reset.
Example: Resetting the total call duration
1
From the Menu, select [Settings] →
[Management] → [NW Services] → [Call
Cost/Duration] → [Reset] and press
Ｓｅｌｅｃｔ ｒｅｓｅｔ
ｉｔｅｍ
Ｔｏｔａｌ ｄｕｒａｔｉｏｎ
Ｔｏｔａｌ ｃｏｓｔ
2
Select [Total duration] and press
The Security code screen appears.
To reset the total call charge
Select [Total cost], enter the PIN2 code, and
select [Yes].
3
Enter the Security code and press
(OK).
The screen for confirming whether to reset appears.
4
Select [Yes] and press
The total call duration is reset and the reset date/
time are updated.
Automatically Resetting the
Total Call Charge
You can set to automatically reset the total call
charge at 00:00 a.m. on the first day of every
month.
1
From the Menu, select [Settings] →
[Management] → [NW Services] → [Call
Cost/Duration] → [Auto reset] and press
.
The PIN2 code input screen appears.
2
Enter the PIN2 code and press
The Auto reset display appears.
3
Select [ON]/[OFF] and press
The Auto reset is set.
.
.
.
(OK).
.