Sony Ericsson FOMA SO905iCS Manual page 161

Selecting an Image Size
You can select the size of a still image and movie to be recorded from nine and four
types, respectively.
 When the Shoot mode of the still image is set to [Panorama], [Continuous mode], or [Shoot with
frame], you cannot select the image size.
 When the size of a movie is set to [QVGA(320×240)] or [VGA(640×480)], the image quality of
the movie is changed to [Super fine]. When the size of a movie whose image quality is [Super
fine] is set to [sQCIF(128×96)], the image quality of the movie is changed to [Standard].
1
Press (Func) in the Camera mode display, select [
image size, and press
 You can also set an image size by pressing
The image size is set and the icon for the current image size appears.
 When the image size is set to [QVGA(240×320)] or [Stby(480×864)], the saved with this
side up indication "
Still image (Out-camera)
QCIF(176×144)
QVGA(240×320)
VGA(640×480)
 The image size which can be recorded with the In-camera is [QCIF(176×144)], [QVGA(240
×320)], or [VGA(640×480)].
Movie (Out-/In-camera)
sQCIF(128×96)
QCIF(176×144)
Switching the Camera Used for Recording
You can switch between the Out- and In-cameras for recording.
 When the Shoot mode of the still image is set to [Smile shutter], [Panorama], [High sensitivity],
[BestPic™], or [Continuous mode], you cannot switch the camera.
 When the Shoot mode of the still image is set to [Shoot with frame] while the image size is set
to [Stby(480×864)], you cannot switch the camera from the Out-camera to In-camera.
 When the camera is switched from the Out-camera to In-camera, the following items are
changed. The Select scene, Face detection, Auto Focus, Flash, Digital Zooming, and Image
stabilize restore the previous settings when switching the camera to the Out-camera.
Item
Image size
EV
Auto Focus
White balance
Picture effect
Image stabilize
※1 The setting of the Image size or EV is changed to the listed one when it cannot be set for the In-camera.
※2 The setting of the EV, White balance, Photometry, or Picture effect is changed to the listed
one when the Select scene is set to other than [AUTO] for the Out-camera.
※3 The Picture effect is changed to [OFF] when it is set to [Solarization].
.
" appears. The image is saved with the indicated side up.
Stby(480×864)
1M(1280×960)
2M(1632×1224)
QVGA(320×240)
VGA(640×480)
Setting
VGA(640×480)※1
±0.0EV※1※2
OFF
AUTO※2
OFF※2※3
OFF
or in the Camera mode display.
Item
Select scene
Face detection
Flash
Photometry
Digital Zooming
] (Select size) → an
2M Wide(1920×1080)
3M(2048×1536)
5M(2592×1944)
Setting
AUTO
OFF
OFF
Center※2
OFF
Continued
159