Table of Contents
Advertisement
●
You cannot originate a PushTalk call from the Own number display of the B mode.
●
When you replace the UIM (From 2in1 subscriber to 2in1 subscriber) while 2in1 is used, to
obtain a correct Number B, you need to perform the 2in1 function OFF (P.400) first, and then
set the 2in1 to ON again.
When you replace the UIM (From 2in1 subscriber to 2in1 non-subscriber), perform the 2in1
function OFF.
●
When you replace the UIM while 2in1 is used, you need to reset all the items of the personal
data at the B mode (P.47).
Saving Your Personal Data
You can save your personal data such as your name, postal address, and mail
address, and check saved data in the Own number display and quote this data in the
text input display.
1
Press
(Edit) in the Own number display.
Ｂａｓｉｃ
Ｄｅｔａｉｌ
０９０ＸＸＸＸＸＸＸＸ
ＯＦＦ
2
Save each item at the Basic display.
Icon
Enter your mail address within 50 half-width alphanumeric characters and
symbols.
Enter your name within 16 full-width or 32 half-width characters.
When entering your name, the reading is automatically entered.
To edit the reading, enter a reading within 32 half-width characters.
Select [ON]/[OFF] of the Secret.
To display the entry saved as Secret, set the Secret display to [ON].
46
Settings
Advertisement
Chapters
Table of Contents
