Preparations And Flow Of Data Transfer (Obex™ Communication); Preparations And Flow Of Data Communication - Sony Ericsson FOMA SO905iCS Manual

● DNS (Domain Name System)
DNS is a system that converts a domain name (example:
nttdocomo.co.jp) into an IP address, which is used by a PC.
● QoS (Quality of Service)
Service quality technology that enables the user to use a
communication line in accordance with requirements. If you
are using the FOMA terminal, you can set the communication
speed for connection.
● 通信設定最適化 (Optimizing the communication settings)
"通信設定最適化" is a "TCP parameter setting" tool that makes
optimal use of TCP/IP transmission capabilities for packet
communication on the FOMA network. To make the most of the
communication performance of the FOMA terminal, you need
to configure the communication settings using this software.
Preparations and Flow of Data
Transfer (OBEX™ Communication)
To use the FOMA USB Cable with Charge Function
01/02 (optional), install the FOMA communication
configuration files.
Install the FOMA communication configuration files (P.4).
 Install from the supplied CD-ROM
or
 Download from the DoCoMo's website and install
Data transfer
Preparations and Flow of Data
Communication
The preparations required for performing packet and
64K data communication by connecting the FOMA
terminal to a PC are given below.
Install the FOMA communication configuration files (P.4).
 Install from the supplied CD-ROM
or
 Download from the DoCoMo's website and install
Connect the FOMA terminal to a PC (P.4).
Check the installed FOMA communication configuration files (P.5).
When you use the
FOMA PC setup
software
Install the FOMA PC setup software (P.7, 13).
Set a host.
Packet communication
 "mopera U" or
"mopera" (P.9, 15)
 Other provider
(P.9, 15)
Perform communication (P.11, 17).
Start up communication software that is
compatible with AT commands (P.18).
Set ON/OFF for the Notify caller ID (P.19).
Perform the dial-up connection (P.23).
3
When you do not use
the FOMA PC setup
software
64K data communication
 "mopera U" or
"mopera" (P.10,16)
 Other provider
(P.11, 17)
Set a host (P.18).
Set up the dial-up network (P.19).