Sony Ericsson FOMA SO905iCS Manual page 186

2
Locate the JAN/QR code at the center of the display and press
Ｓｃａｎｎｉｎｇ Ｓｃａｎｎｉｎｇ
Ｆｉｘ ｃａｍｅｒａ Ｆｉｘ ｃａｍｅｒａ
3
Press (Save).
The data from the scanned JAN/QR code is saved.
● Some QR codes allow you to save data such as a name, phone number, and mail address
all at once in the Phonebook just by scanning them.
●
When scanned characters cannot be entered in the text editing display, they are replaced
with as many spaces (blanks).
● A scanned image may not be saved depending on its image or file size.
Displaying the Saved Data
You can save up to 10 data entries for JAN or QR codes that are scanned.
 When a total of 10 data entries is saved and a new JAN/QR code is scanned, unprotected data
is overwritten from the oldest.
1
From the Menu, select [LifeKit] → [Bar code reader] → [Saved data] and
press
Ｄａｔａ ｌｉｓｔ
２００８／０２／１４ １３：５６
２００８／０２／０７ ２３：１３
２００８／０１／２８ １４：２５
２００８／０１／２８ １０：４２
２００８／０１／２３ １６：２１
２００８／０１／１２ １３：２９
２００８／０１／０３ １９：２８
２００８／０１／０３ ０９：４７
２００７／１２／３０ １４：０５
２００７／１２／３０ １３：５０
2
Select the data and press
２００８／０２／１４ １３：５６
Ａｄｄ ｔｏ ｐｈｏｎｅｂｏｏｋ
Ｎａｍｅ：ドコモ太郎
Ｒｅａｄｉｎｇ：ト゛コモタロウ
ＴＥＬ：０３ＸＸＸＸＸＸＸＸ
Ｅ−ｍａｉｌ：ｄｏｃｏｍｏ．ｔａｒｏ．
ｄｏｃｏｍｏ．ｎｅ．ｊｐ
184
The scanning of the JAN/QR code starts.
When the scanning is completed, the end sound is heard and the data
that has been scanned is displayed in the normal display.
To save a scanned URL as a bookmark
Move the cursor to the URL and from the Function menu, select [Add
bookmark] → [Yes] → a folder.
To save scanned data such as a phone number
Move the cursor to data such as a phone number and from the
Function menu, select [Add to phonebook] → [Yes] and save the
scanned data in the Phonebook.
 Follow the same steps as in "Add to FOMA terminal phonebook"
(P.95, step 3 to 6) or "Add to UIM phonebook" (P.98, step 3 to 4).
.
To delete data
Move the cursor to the data and from the Function menu, select [Delete]
→ [Delete one] → [Yes]. To delete several data, from the Function
menu, select [Delete] → [Select&delete], select data, press
(Complete), and then select [Yes]. To delete all data, from the Function
menu, select [Delete] → [Delete all], enter the Security code, and
select [Yes].
To protect data
Move the cursor to the data and from the Function menu, select [Protect
ON/OFF] → [Yes]. "
△△ @
" changes to "
.
(Scan).
".