Table of Contents
Advertisement
Locking the Keypad to Prevent Unauthorized Use
You can set the Lock all to prevent others from using the FOMA terminal. When the
Lock all is set, you cannot perform any operation other than powering on/off the
FOMA terminal and answering a voice or videophone call.
1
From the Menu, select [Settings] → [Lock/Security] → [Lock all] and press
.
The Security code screen appears.
2
Enter the Security code and press
The screen for confirming whether to set the Lock all appears.
3
Select [Yes] and press
The Lock all is set and the message "Lock all" appears in the stand-by display.
To cancel the Lock all
Enter the Security code and press
●
To call emergency numbers (110, 119, and 118) when the Lock all is set, enter the
emergency number and press
the security code input field of the Security code screen.
●
The FOMA terminal is powered off after five unsuccessful attempts to cancel the Lock all.
●
When the Lock all is set, the default ring tone is used for an incoming voice or videophone
call. One of the images from the [Preinstall] folder in My picture of the Data Box is used
for the incoming image. In this case, not the caller's name but the caller's phone number
is displayed. Chaku-moji, if received, is not displayed, but when you cancel the Lock all,
Chaku-moji can be checked in the Received record (P.57).
●
When the Lock all is set, you cannot send a substitute image to answer a videophone call.
You can only adjust the volume of the caller's voice or switch the camera during a call.
●
If there is an incoming PushTalk call when the Lock all is set, the FOMA terminal does not
receive the call and the caller hears a busy tone. The call is saved in the Received record.
When you cancel the Lock all, the notification icon "
●
If you receive a request for your location information while the Lock all is set, the FOMA
terminal answers the request. In this case, not the caller's name but the caller's phone
number is displayed.
●
When the Lock all is set, i-mode mail, Message R/F, and SMS are still received automatically,
however, the receiving operations, such as displaying the incoming mail display or the
received mail display or the sounding of the ring tone, are not performed and you are not
notified of the reception.
●
When you set the Lock all, the Alarm and Schedule alarm do not operate.
●
When you set the Lock all, the image set for the stand-by display is changed to the
preinstalled [Cyber-shot Logo] image. The i-Channel Telop text is not displayed.
●
When you set the Lock all, the notification icons other than "
displayed. When you cancel the Lock all, the icons are displayed again.
(OK).
.
(OK).
. The emergency number is displayed as asterisks (
" (Missed call) appears.
<Lock all>
＊
) in
" (Answer X) are not
Continued
135
Advertisement
Chapters
Table of Contents
