Originating a PushTalk Call Using the PushTalk Phonebook
If you save persons as members in the PushTalk phonebook, you can originate a
PushTalk call to several persons.
When 2in1 is set to the B mode, you cannot use the PushTalk phonebook.
When 2in1 is set to the Dual mode, you cannot use members for which the Phonebook 2in1
setting is set to [B].
1
Press
for over a second in the stand-by display, select a member, and
press
.
Member
携帯あき子
携帯なつ子
携帯はる子
ドコモ一郎
ドコモ二郎
2
Press
.
Dialing PT group
携帯あき子
携帯はる子
ドコモ一郎
ドコモ二郎
On PushTalk
Myself
携帯あき子 Calling
携帯はる子 Connected
ドコモ一郎 Connected
ドコモ二郎 Connected
3
Press
to end the communication.
Originating a PushTalk Call from the Group
1
Press
for over a second in the stand-by display and press
Group
○○○同好会
△△△クラブ
○△○愛好会
グループ4
グループ5
グループ6
グループ7
グループ8
グループ9
グループ10
グループ11
グループ12
"
" appears for the selected member.
To display phone numbers
Press
to switch the display temporarily between names and
phone numbers.
When a PushTalk call is originated, the signal tone sounds.
To speak
Press
while the floor is open. You can speak while you press and
hold
.
To display group numbers
When saved, group icons are displayed instead of group numbers.
Press
to switch the display temporarily between group icons and
group numbers.
(Group).
87
Continued