Sony Ericsson FOMA SO905iCS Manual page 295

6
Press (Save), select [Overwrite], and
press .
The image with the stamp is saved by overwriting
the original image.
To save as a new image
Select [Save new] → a place to save to.
Pasting Text
Text can be pasted to an image of [sQCIF(128
×96)], [QCIF(176×144)], [QVGA(240×
320)], [CIF(352×288)], [VGA(640×480)], and
[Stby(480×864)]. The style and color of the
text can also be specified.
Example: Pasting text and saving by overwriting
1
From My picture file list, select an image,
press , and press
The Function menu appears.
2
Select [Edit photo] → [Text stamp] and
press .
Ｔｅｘｔ ｓｔａｍｐ
Ｉｎｐｕｔ ｔｅｘｔ
Ｆｏｎｔ ｃｏｌｏｒ □
Ｆｏｎｔ ｓｉｚｅ Ｓｔｄ
Ｆｏｎｔ ｔｙｐｅ Ｓｔｄ
Ｔｈｉｃｋｎｅｓｓ Ｓｔｄ
Ｕｎｄｅｒｌｉｎｅ Ｎｏ
[Input text]:
Enter a text to be pasted within 10 full-width or
20 half-width characters.
[Font color]:
Select the color of a font to be pasted.
[Font size]:
Select the size of a font to be pasted.
[Font type]:
Select the type of a font to be pasted.
[Thickness]:
Select the thickness of a font to be pasted.
[Underline]:
Select whether to display a line under a font to
be pasted.
3
Set each item.
4
Press (OK).
5
Use /
and press (Paste).
(Func).
to adjust the position
To add the same text stamp
Repeat step 5.
To paste another text stamp
Press (Retry) and perform step 2 to 5 again.
6
Press (OK).
7
Press (Save), select [Overwrite], and
press .
The image with the text is saved by overwriting the
original image.
To save as a new image
Select [Save new] → a place to save to.
Trimming Part of an Image After
Zoom In
You can specify a part of an image after
zooming in on it and trim it into a size of
[ s Q C I F ( 1 2 8 ×9 6 ) ] , [ Q C I F ( 1 7 6 ×1 4 4 ) ] ,
[ Q V G A ( 2 4 0 ×3 2 0 ) ] , [ C I F ( 3 5 2 ×2 8 8 ) ] ,
[VGA(640×480)], and [Stand-by(480×864)].
 When the image size is [sQCIF(128×96)], you
cannot trim this image.
Example: Trimming an image and saving by overwriting
1
From My picture file list, select an image,
press , and press
The Function menu appears.
2
Select [Edit photo] → [Zoom&trim] → a
size of an image to be trimmed and press
.
 The image size displayed in gray is not available
for trimming.
3
Press (Zoom(T))/
ＱＣＩＦ（１７６×１４４）
 Press
(Zoom(T)) to enlarge and
to reduce an image.
The zoom is adjusted and the bar is displayed for
the zoom magnification you have set.
4
Use /
trimmed and press
The image is trimmed to the selected size.
(Func).
(Zoom(W)).
(Zoom(W))
to select the area to be
(OK).
Continued
293