Sony Ericsson FOMA SO905iCS Manual page 526

Command
AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of Service)
cid=1-10
n=None/384
m=None/3648 The minimum downlink communication speed (kbps) used between
AT+CGEQREQ=[<cid>]
cid=1-10
AT+CGMR
AT+CGREG=<n>
n=0
n=1
[&F][&W]
AT+CGSN
AT+CLIP=<n>
n=0
[&F][&W] n=1
AT+CLIR=<n>
n=0
n=1
n=2
AT+CMEE=<n>
n=0
n=1
[&F][&W] n=2
AT+CNUM
AT+CR=<mode>
mode=0
mode=1
[&F][&W]
AT+CRC=<n>
n=0
[&F][&W] n=1
※1 Resets all cid to the default settings.
Outline/Parameter
notified from the network when packet communication is established.
Used for managing hosts (APN) saved in the FOMA terminal for
packet communication
The minimum uplink communication speed (kbps) used between
the FOMA terminal and the base station.
None: Permits all speeds (Default).
384: Packet communication may not be connected in some cases.
the FOMA terminal and the base station.
None: Permits all speeds (Default).
3648: Packet communication may not be connected in some cases.
Sets the QoS (Quality of Service) requested to the network when
packet communication is originated.
Used for managing hosts (APN) saved in the FOMA terminal for
packet communication
Displays the version of the FOMA terminal in 16 digits.
Sets whether the network registration status is notified.
No notification (Default)
Notifies the registration status inside/outside of the service area in the
"+CGREG:<n>,<stat>" format.
stat=0: Outside of the service area, stat=1: Inside of the service area
(home), stat=4: Unknown, stat=5: Inside of the service area (visitor)
Displays the manufacturing number of the FOMA terminal.
Sets whether the sender's caller ID is displayed on a PC when
receiving 64K data communication.
When you enter "AT+CLIP?", "+CLIP:n,m" appears.
m=0: Network setting that does not notify caller ID to the other party
when originating 64K data communication, m=1: Network setting
that notifies caller ID to the other party when originating 64K data
communication, m=2: Unknown
Does not display the sender's caller ID (Default, when the
parameter is omitted).
Displays the sender's caller ID.
Sets whether the recipient is notified of your caller ID when you
originate 64K data communication.
When you enter "AT+CLIR?", "+CLIR:n,m" appears.
m=0: CLIR is not executed (always notifies), m=1: CLIR is always executed
(never notifies), m=2: Unknown, m=3: CLIR temporary mode (Default: No
notification), m=4: CLIR temporary mode (Default: Notification)
The terms of the CLIR service are applied (When the parameter is omitted).
No notification
Notification (Default)
Sets the error report format of the FOMA terminal (P.28).
Displays "ERROR" (Default, when the parameter is omitted).
Displays using the "+CME ERROR:xxxx" format (xxxx are numerics).
Displays using the "+CME ERROR:xxxx" format (xxxx are characters).
Displays the home station number of the FOMA terminal using the
"+CNUM:,"home station number",type".
type=129: Does not include the international access code +,
type=145: Includes the international access code +
Sets whether the communication type is displayed before
displaying "CONNECT" when the line is connected.
Does not display (Default, when the parameter is omitted).
Displays using the "+CR:serv" format.
serv=SYNC: 64K data communication, serv=GPRS: Packet communication
Sets whether the extended result code is used when receiving a call. AT+CRC=0
Does not use (Default).
Uses.
※2 Resets a specified cid to the default setting.
25
Input example
AT+CGEQMIN=2,,384,3648
AT+CGEQMIN=2,,384
AT+CGEQMIN=2,,,3648
AT+CGEQMIN= ※1
AT+CGEQMIN=<cid> ※2
AT+CGEQREQ= ※1
AT+CGEQREQ=<cid> ※2
AT+CGMR
AT+CGMR=?
AT+CGREG=1
AT+CGREG?
AT+CGREG=?
AT+CGSN
AT+CGSN=?
AT+CLIP=0
AT+CLIP?
AT+CLIP=?
AT+CLIR=0
AT+CLIR?
AT+CLIR=?
AT+CMEE=0
AT+CMEE?
AT+CMEE=?
AT+CNUM
AT+CNUM?
AT+CNUM=?
AT+CR=0
AT+CR?
AT+CR=?
AT+CRC?
AT+CRC=?