Setting Whether To Notify That Within The Communication Range; Ic Act. Notice - Sony Ericsson FOMA SO905iCS Manual

1
From the Menu, select [Osaifu-Keitai]
→ [ S e t t i n g s ] → [ To r u C a ] → [ A u t o
recognition] and press
[ON]:
Available ToruCa cards are automatically
recognized by the reading device and saved in
[Used].
[OFF]:
Available ToruCa cards are not recognized by
the reading device.
To display the explanation about the Auto recognition
Move the cursor to [Auto recognition] and press
(Help).
2
Select [ON]/[OFF] and press
The Auto recognition is set.
When you select [ON]
Select [Yes].
● When the Lock all or Personal data lock is set, a
ToruCa card does not move to [Used] even if it is
to be deleted regardless of the Auto recognition
being set to [ON].
●
If you hold up and show the FOMA terminal to
a reading device with the Auto recognition set
to [OFF], a message confirming whether to use
the Automatic reading function or stating that the
Automatic reading function is OFF may appear.
To use the Automatic reading function, select
[Yes] to set the Auto recognition to [ON].
Setting Whether to Check the
Duplication of a ToruCa(Detail) Card
You can set the FOMA terminal to check if the
ToruCa(detail) card you are trying to obtain has
been obtained already when you obtain the
card from a reading device.
1
From the Menu, select [Osaifu-Keitai] →
[Settings] → [ToruCa] → [Duplication
check] and press
[ON]:
Check if a target ToruCa(detail) card is already
obtained. Do not obtain a ToruCa card that you
have obtained already. Obtain a ToruCa card
only when you have not obtained it yet.
[OFF]:
Do not check if a target ToruCa(detail) card is
already obtained.
.
.
.
2
Select [ON]/[OFF] and press
The Duplication check is set.
Setting Whether to Notify That within
the Communication Range
You can set the FOMA terminal whether to notify
you of being within the FeliCa communication
range or the FeliCa communication being
started by vibration or the FeliCa Sign when
you are close to a reading device with the
FOMA terminal powered on.
1
From the Menu, select [Osaifu-Keitai] →
[Settings] → [IC act. notice] and press
.
ＩＣ ａｃｔ． ｎｏｔｉｃｅ
Ｂｙ ｖｉｂｒａｔｏｒ
ＯＮ
Ｂｙ ＬＥＤ
ＯＮ
[By vibrator]:
Set whether to activate the vibrator when the
communication starts.
[By LED]:
Set whether to turn on the FeliCa Sign when
you enter the range in which communication is
enabled or when the communication starts.
2
Select [ON]/[OFF] of the vibrator at [By
vibrator].
3
Select [ON]/[OFF] of the FeliCa Sign at [By
LED].
● When the Public mode (Drive mode) is set, the
FeliCa Sign does not light and the vibrator does
not operate even if the By vibrator and By LED
are set to [ON].
.
<IC act. notice>
261