Updating the Software Immediately (Now update)
1
From the screen for selecting the update type, select [Now update] and press
Ready to
download?
Notice:
No functions are
available except
receive calls
After a while, the software download starts.
When downloading starts, step 2 is performed automatically (no need to operate).
To cancel the download
Press
If you stop the download before it is completed, the data downloaded up until this point is deleted.
2
After the download is completed, press
Ready to
rewrite?
The software rewriting starts and the incoming indicator lights. After rewriting is completed,
the FOMA terminal is restarted automatically.
While the software is being rewritten, all key operations are disabled. You even cannot stop
the update operation.
●
When the FOMA terminal is restarted, "
If there is any information that you must confirm, "
and message disappear after you check the notification information by selecting the icon.
Reserving a Date/Time for the Software Update (Reserve)
If downloading takes too long or the server is congested, you can connect to the
server and preset a date/time to start the software update.
Example: Reserving the software update on February 13 (Wed) 1:05 a.m.
1
From the screen for selecting the update type, select [Reserve] and press
List of choice
2/13 Wed 1:05
2/13 Wed 3:44
2/13 Wed 4:18
2/13 Wed 4:44
2/13 Wed 5:28
2/13 Wed 5:55
2/13 Wed 6:23
2/13 Wed 6:57
2/13 Wed 7:15
2/13 Wed 7:50
2/13 Wed 8:27
2/13 Wed 8:58
460
Connecting
(Cancel) while downloading.
書換え中
Rewriting
The FOMA terminal connects to the server and displays a list of
reservation choices.
When reserving the software update, the time set on the server is
displayed.
To select another date/time
Press
(Others) and select the preferred date, time slot, and time.
You can confirm vacant time slot available for reservation in the
Preferred- time slot display as follows:
"○: Available", "△: Almost full", or "×: Full".
To cancel the reservation operation
Press
(Cancel).
SW Update
Downloading
(OK).
書換え完了しました
再起動します
Rewriting is complete.
Ready to reload?
" (Update complete) appears in the stand-by display.
" (Check for update) appears. The icon
.
.