Sony Ericsson FOMA SO905iCS Manual page 465

Updating the Pattern Definitions
1
From the Menu, select [Settings] → [Management] → [Scan function] →
[Update] and press
Ｕｐｄａｔｅ ｐａｔｔｅｒｎ
ｄｅｆｉｎｉｔｉｏｎｓ？
Ｙｅｓ
Ｎｏ
2
Select [Yes] → [Yes] and press
Ｒｅａｄｙ ｔｏ
ｓｅｎｄ ｙｏｕｒ
ｔｅｒｍｉｎａｌ ＩＤ？
Ｙｅｓ
Ｎｏ
When the pattern definitions are the latest available
There is no need to update the pattern definitions. Use them as is.
● When you update the pattern definitions, your FOMA terminal-specific information (such as
model and manufacturer's serial number) is automatically sent to the server (server for the
scanning function under DoCoMo's supervision). DoCoMo will not use the information sent
from your mobile phone for any purposes other than the scanning function.
● You cannot update the pattern definitions in the following cases:
- When the date/time is not set
- During a call
- While the Lock all is set
- While the Lock key is set
- When another function is being used
- When the FOMA terminal is connected to an external device such as a PC
- When the international roaming service is used
● If you cancel the downloading operation before it is completed, the data downloaded until
this point is deleted.
Setting Whether Pattern Definitions Are Automatically Updated
You can set whether to update the pattern definitions automatically.
1
From the Menu, select [Settings] → [Management] → [Scan function] → [Set
auto-update] and press
Ｓｅｔ ａｕｔｏ−ｕｐｄａｔｅ
ｏｆ ｐａｔｔｅｒｎ
ｄｅｆｉｎｉｔｉｏｎｓ
Ｖａｌｉｄ
Ｉｎｖａｌｉｄ
2
Select [Valid] → [Yes] → [Yes] and press
The Set auto-update is set.
.
Ｕｐｄａｔｅ
Ｄｏｗｎｌｏａｄｉｎｇ
- When "
- While the Self mode is set
- While the Omakase Lock is set
- When the UIM is not inserted
.
[Valid] : Update the pattern definitions automatically.
[Invalid] : Do not update the pattern definitions automatically.
.
" is displayed
.
463
Continued