Receiving Data Using iC
Communication
Receiving Data
1
Place the FeliCa mark "
terminal over that of the other terminal in
the stand-by display on both terminals.
The vibrator vibrates and the FeliCa Sign lights.
"
" changes to "
started.
The screen for confirming whether to save data
appears.
2
Select [Yes] and press
The received data is saved.
When you receive Phonebook data
The screen for confirming whether to save data
in the PushTalk phonebook appears. If you select
[Yes], the data is saved in both the PushTalk
and FOMA terminal phonebooks. If you select
[No], the data is saved in the FOMA terminal
phonebook only. When there are several phone
numbers, select the phone number to be saved
in the PushTalk phonebook.
Receiving All Data
It is necessary that you and the sender determine
the 4-digit authentication password beforehand.
Example: Adding received data
1
Place the FeliCa mark "
terminal over that of the other terminal in
the stand-by display on both terminals.
The vibrator vibrates and the FeliCa Sign lights.
"
" changes to "
Select the way
to save
Add
Overwrite
[Add]:
Save received data by adding to the existing
data.
[Overwrite]:
The screen for confirming whether to overwrite
the existing data with the received data appears.
Note that all existing data is deleted if you select
[Yes].
332
" of the FOMA
" and data exchange is
.
" of the FOMA
".
2
Select [Add] and press
The Security code screen appears.
3
Enter the Security code and press
(OK).
The Authentication password screen appears.
4
Enter the authentication password.
Data exchange is started and the data is added to
the existing data.
To cancel receiving
Press
(Cancel).
Sending Data Using iC
Communication
Sending Data
1
Select data to be sent and press
(Func).
The Function menu appears.
2
Select [iC transmission] and press
"
" c h a n g e s t o "
confirming whether to begin data exchange
appears.
To send a still image/movie displayed in the Camera
mode
From the Function menu, select [
→ [
](iC transmission).
To send one entry in the Phonebook/Text Memo
Move the cursor to the data and from the
Function menu, select [iC transmission] → [iC
transmission].
3
Select [Yes] and press
The message "Place
4
Place the FeliCa mark "
terminal over that of the other terminal.
The FeliCa Sign lights.
Data exchange is started.
.
.
" a n d t h e s c re e n f o r
](Send data)
.
over another one" appears.
" of the FOMA