Sony Ericsson FOMA SO905iCS Manual page 517

7
Click [追加] and set a host (APN) and click [OK].
Set 2 or a number between 4 and 10 for cid.
8
Select the newly added host (APN) and click [OK].
9
Click [次へ].
10
Set [ユーザID] and [パスワード] and click [次へ].
To set [ユーザID] and [パスワード], enter the appropriate
information supplied by your provider accurately with
careful attention to the letter case.
11
Check the setting information and click [完了].
12
Click [OK].
Easy Setup (64K Data Communication)
When Using "mopera U" or "mopera"
 Note that 64K data communication could be expensive if it is
performed for a long period of time.
1
Start the FOMA PC setup software and click [かん
たん設定].
2
Select [64Kデータ通信] and click [次へ].
3
Select [ 『mopera U』 への接続] or [ 『mopera』 への接
続] and click [次へ].
When you select [ 『mopera U』 への接続], the confirmation
window for subscription appears. If you have already
subscribed to "mopera U", click [はい].
4
Enter a host name (any name) at [接続名] and click
[次へ].
 You cannot enter half-width characters, "¥" "/" ":" " ＊" "?"
"<" ">" "|" """ and "!".
 If [FOMA SO905iCS] is not set for [モデムの選択], select
[FOMA SO905iCS].
 To connect to "mopera U" or "mopera", your caller ID
must be notified. Select [186を付加する （通知する） ].
5
Set [ユーザID] and [パスワード] and click [次へ].
You can connect with [ユーザID] and [パスワード] left
blank.
6
Check the setting information and click [完了].
7
Click [OK].
16