Update notification
●
The notification icon of the SW Update appears only when DoCoMo notifies software update.
Activating the Software Update
1
From the Menu, select [Settings] → [Management] → [SW Update] and
press
.
The Security code screen appears.
2
Enter the Security code and press
The Security code is masked by "
The Security code is set to "0000" at the time of purchase.
3
Select [Update] and press
Establishing
SSL session
(Authenti−
cating)
The FOMA terminal starts SSL communication to check if the software update is necessary.
4
If necessary, select the timing to start update and press
Update is needed
Now update
Reserve
Cancel
●
When the server is busy, the screen to the right appears. To reserve, select
[Reserve] and set a date/time for the update.
When the Set auto-update is set to [Only notice], the notification icon "
(Update notification) appears in the stand-by display.
To activate the software update
Press
(Link) in the stand-by display, select "
****
.
Checking
[Now update] : Start updating the software. The software update may not
be completed successfully if the server is busy.
[Reserve]
: Reserve a date/time to start the software update.
[Cancel]
: Do not start updating the software.
When the message informing there is no need to update the software
appears
You do not need to update the software. Continue to use the FOMA
terminal without updating.
(OK).
".
"
", and select [Yes].
.
Server is busy
Reserve
Cancel
459
Continued