Table of Contents
Advertisement
LEDs
Each port on the AT-SBx31GP24 PoE Line Card has two LEDs. The LEDs
are shown in Figure 17 and described in Table 8.
Figure 17. Port LEDs on the AT-SBx31GP24 PoE Line Card
Table 8. Port LEDs on the AT-SBx31GP24 PoE Line Card
LED
Solid Green
Flashing
Green
Solid Amber
L/A
Flashing
Amber
Off
Green
Solid Amber
PoE
Flashing
Amber
SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
State
The port has established an 1000 Mbps link to a
network device.
The port is transmitting or receiving data at 1000
Mbps.
The port has established a 10 or 100 Mbps link to
a network device.
The port is transmitting or receiving data at 10 or
100 Mbps.
The port has not established a link with another
network device or the LEDs are turned off. To turn
on the LEDs, use the eco-friendly button on the
controller card.
The switch is detecting a powered device (PD) on
the port and is delivering power to it.
The switch has shutdown PoE+ on the port
because of a fault condition.
The switch is detecting a PD on the port but is not
delivering power to it because the maximum power
budget has been reached.
Description
39
Advertisement
Table of Contents
