SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
Anchor
Figure 115. Securing the Power Cord for the AT-SBxPWRPOE1 Power
4. Connect the power cord to an appropriate AC power source to power
on the power supply.
5. If the chassis has two AT-SBxPWRPOE1 Power Supplies, repeat this
procedure to power on the second power supply.
Figure 116 on page 178 is an illustration of the power cords for a
chassis with four power supplies.
Supply to an Anchor
177