Table of Contents
Advertisement
SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
Command has been submitted
officer SEC>>
Try installing the card in a different slot. If it works in the new slot,
the problem is with the previous slot.
Try installing the card in a different chassis. If it works in the new
chassis, the problem is with the previous chassis. If the problem
persists, the problem is with the card.
You can obtain card status information with the SwitchBlade x3106
Management Software and the SHOW CARD command, as shown
in Figure 152 on page 214.
233
Advertisement
Table of Contents
