At-Sbx31Xz4 Xfp Line Card; Leds; Figure 26: At-Sbx31Xz4 Xfp Line Card - Allied Telesis SwitchBlade x3106 Installation Manual

AT-SBx31XZ4 XFP Line Card

LEDs

SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
The AT-SBx31XZ4 XFP Line Card, shown in Figure 26, is a 10 Gigabit
Ethernet switch.
Figure 26. AT-SBx31XZ4 XFP Line Card
Here are the main features of the line card:
 Four slots for 10Gbps XFP transceivers
 Supports 10GBase-SR/LR/ER fiber optic transceivers
 Port Link/Activity (L/A) LEDs
 32K entry MAC address table
 16 Mb buffer memory
 Jumbo frame support:
– 10240 octets for tagged and untagged traffic
between ports on the same line card
– 10232 octets for untagged traffic between ports on
different line cards
– 10236 octets for tagged traffic between ports on
different line cards

Non-blocking full-wire speed switching on all packet sizes, with two
AT-SBx31CFC960 Controller Fabric Cards
 Hot swappable
Contact your Allied Telesis sales representative for a list of supported
transceivers.
Each XFP slot on the AT-SBx31XZ4 XFP Line Card has one LED. The
LED is shown in Figure 27 on page 50 and described in Table 11 on
page 50.
49