Figure 75: Tightening The Thumb Screws On The At-Sbx31Cfc960 Card - Allied Telesis SwitchBlade x3106 Installation Manual

SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
Figure 75. Tightening the Thumb Screws on the AT-SBx31CFC960 Card
10. Tighten the screws with a # 2 Phillips-head screwdriver to secure the
controller card to the chassis.
Allied Telesis recommends tightening the screws to 5 inch-lbs.
11. if you have a second AT-SBx31CFC960 Controller Fabric Card, repeat
this procedure to install it in the chassis.
12. Go to "Installing the Ethernet Line Cards" on page 134.
133