Table of Contents
Advertisement
SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
Figure 98. Attaching a Fiber Optic Cable to an SFP+ Transceiver in the
6. Repeat this procedure to install additional SFP plus transceivers in the
AT-SBx31XS6 Line Cards.
After installing and cabling the SFP+ transceivers, do one of the following:
To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
After cabling all the ports in the chassis, go to Chapter 9,
"Powering On the Chassis" on page 171.
AT-SBx31XS6 Line Card
157
Advertisement
Table of Contents
