Table of Contents
Advertisement
SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
6. Repeat this procedure to install additional SFP or SFP+ transceivers in
the AT-SBx31CFC960 Controller Card.
After installing and cabling the transceivers, do one of the following:
To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
After cabling all the ports in the chassis, go to Chapter 9,
"Powering On the Chassis" on page 171.
169
Advertisement
Table of Contents
