RIGOL
System-related
Beeper
When the beeper is enabled, you can hear the sound of the beeper when the
following conditions occur:
Press a key on the front panel
⚫
Use the mouse to operate on the screen
⚫
When a prompt message is displayed
⚫
Click Utility, and then click Beeper continuously to select "ON" (
By default, it is OFF.
Language
This oscilloscope supports menus in multiple languages. Both Chinese and English
are available for the display of the help information, prompt messages, and interface.
Click Utility → Language to select the desired language.
System Information
Click Utility → System → About to view the system information of the oscilloscope,
including the manufacturer, product model, serial number, etc.
You can also view the system information of the oscilloscope in the "Help" system
menu.
Power On
You can set the system configuration to be recalled when the oscilloscope is powered
on again after power-off.
Click Utility → System, and then click Power On continuously to select "Last" or
"Default". By default, it is "Default".
Last: returns to the setting of the system at last power-off.
⚫
Default: returns to the factory setting of the system.
⚫
19-8
Chapter 19 System Utility Function Setting
DS8000-R User Guide
) or "OFF" (
).