3.6
Download to the PLC
3.6.1
How to download the MPI interface from NetPro to the PLC
Introduction
The following section describes how to download the MPI interface configured in HW Config
from NetPro to the PLC.
Requirements
● Configuration has been completed in HW Config.
● NetPro has been opened in the original window.
● S7-PLCSIM has been started and the CPU is in the "STOP" state
Procedure
Step
1
2
3
4
First Steps (V7.1)
Getting Started, 03/2009, A5E02122181-01
Action
In the network view in NetPro, click on the AS "SIMATIC 400(1)" symbol on the MPI/DP"
interface.
Open the context menu and select menu command Download in current project >
Selected stations.
Click the "Yes" button in the warning dialog box that appears.
Select the menu command Network > Exit.
NetPro closes.
Configuring the hardware and networks
3.6 Download to the PLC
25