Dexcom G5 MOBILE User Manual page 89

Step Picture
Inserting Sensor Wire
8
9
Removing Applicator Barrel and Collar
10
Dexcom G5 Mobile System User Guide
Starting a Sensor Session: Inserting Sensor, Transmitter, and Starting Your Session
(Continued from previous page)
What you do
Place fingers of one hand on edges of adhesive
patch.
Pinch up your skin at the tips of the white adhesive.
Place two fingers directly above collar to steady
applicator barrel.
Place thumb on the white plunger.
Push plunger completely down the applicator
barrel.
• You should hear 2 clicks.
NOTE: Finger placement is important for correct
insertion.
Move two fingers from above collar to below collar.
Keep your thumb as a base on the white plunger.
Pull back collar all the way towards your thumb.
You should hear 2 clicks.
NOTE: Finger placement is important for correct
removal.
(Continued on next page)
87