Confirming Alarm/Alerts - Dexcom G5 MOBILE User Manual

What you see
Signal Loss Alert
What you see

11.7 Confirming Alarm/Alerts

Alarm/Alerts require you to confirm them. How this is done depends on your display device. If
using both display devices, you'll need to confirm Alarm/Alerts on each device separately.
Due to its medical importance, the Alarm is more persistent. Even after confirming an Alarm,
if your sensor's glucose readings remain at or below 55 mg/dL, an Alarm will sound every 30
minutes until readings are above 55 mg/dL.
Dexcom G5 Mobile System User Guide
Sensor Glucose Alarm and Alerts
(Continued from previous page)
Beeps and vibration
Initial Default Alert:
None/Off.
After Setting Change:
Vibrates 2 times.
After 5 Minutes:
Vibrates/beeps 2 times every 5 minutes until confirmed.
Beeps and vibration
Initial Default Alert:
On.
After Setting Change:
Vibrates 1 time.
After 5 Minutes:
Vibrates/beeps 1 time every 5 minutes for a total of 6 times if
not confirmed.
After 6 times it will not alert again.
220