Table of Contents
Advertisement
CHAPTER 3 TERMINALS
PN-32IPLA
PN-32IPLA-A (IP-PAD) card is recommended to be mounted in the LT04 slot of MC0-2
to use the LT slots eficiently. The first 8 ports are provided by LT04 slot and remaining
24 ports are provided by Virtual LT ports. The IP-PAD card is 2-slot width physically.
Therefore, any card cannot be mounted in the LT04 slot. When using PN-1 6VCTA-A
(16VCT) card, they should be mounted in LT02 slot and LT03 slot to connect the front
cable.
PN-4VCTI
PN-4VCTI (4VCT) card is mounted in the next to PN-IPTB (IPT) card. When mounting
two 4VCT cards, IPT card and 4VCT cards are mounted in the right side slots of MC0-2.
LT/AP cards can be mounted in vacant slots.
NEC Philips Unified Solutions
UPD
259 of 259
© NEC Philips Unified Solutions, 2006. All right reserved.
Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Advertisement
Table of Contents
