NEC SOPHO 2000 IPS User Manual page 150

Required Hardware
- SPN-AP00B MRC-E(AP)
Do Not Disturb - Hotel/Motel
This feature allows the Attendant Console(s), Hotel/Motel Front Desk Instrument(s),
guest stations or Property Management System (PMS) terminal(s) to place individual
stations into Do Not Disturb. Calls can be placed from stations set in DND.
Do Not Disturb-System
This feature simultaneously restricts incoming calls to a pre-assigned group of stations by
operation from the Hotel/ Motel Front Desk Instrument(s). Attendant Console(s) and
Hotel/Motel Front Desk Instruments can use the DND OVR key to override this Do Not
Disturb setting.
Do Not Disturb on Sub- or Virtual line (R10)
In addition to Prime Line, DND set/reset is available for Sub-line appearances and Virtual
lines. When DND is set, it is indicated by the Sub-line and Virtual line lamp key.
Do Not Disturb Override by Operator (R12.1)
This enhancement provides increased service level of the call handling in the centralized
operator configuration.
Prior to R11, an operator (Dterm attendant position/Desk Console) can override only an
internal station that sets the Do Not Disturb feature. In R12.1 software, this feature is
applicable over the CCIS network. The operator can override a DND station in the distant
office (connected via CCIS). When the DND station is idle, the DND station will be rung.
When the DND station is busy, the operator can override the busy connection and 3-party
conference is established.
Dterm Assistant
Dterm Assistant is Web-based software which resides on the server and provides end
users with the ability to maintain Dterm Multi-line Terminals and the IPS telephony
features (such as Speed Dialing) from a Web-enabled PC. The Dterm Assistant operates
in a client-server environment and can manage multiple IPS systems over a Local Area
Network (LAN)/Wide Area Network (WAN).
DtermIP
DtermIP is an IP-based Multiline Terminal which provides a built-in capability of peer-to-
peer IP communications. The SOPHO 2000 IPS system provides the DtermIP with same
IP communications capabilities of an IP Enabled Dterm (The IP Enabled Dterm is a
Dterm Multiline Terminal with an add-on IP adapter unit).
DtermIP Automatic Login to Home Station Number (R12.2)
Prior to R12.1, an IP terminal with MAC Address Authentication Mode can be
temporarily used as a terminal with Password Authentication Mode (Login/Logout
Mode). In this case, once the IP terminal with MAC Authentication Mode is logged out,
a user have to login by manual operations. In R12.2 software, new operation mode is
added: Fixed Connection Mode. In this mode, an IP terminal works as follows.
 An IP terminal is normally used like MAC Authentication Mode (no need to login /
logout operation).
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 150