Table of Contents
Advertisement
Class of Service
This feature permits all stations to be assigned a Class of Service in accordance with the
degree of system use desired. The Class of Service is used to assign restrictions for trunk
access and feature access.
Code Restriction
This feature allows the SOPHO 2000 IPS to be programmed to restrict outgoing calls
according to specific area and/or Central Office codes. This restriction is controlled on the
basis of a three-digit area code or six-digit area and office code numbering plan.
Conference (Three/Four Party)
This feature provides a station user the ability to add-on another party (trunk or station) to
a call already in progress. Single Line Telephone users can add up to one additional party
and Multiline Terminal users can add up to two additional parties.
Conference (Six/Ten Party)
This feature permits a station user or Attendant (conference leader) to establish a
Conference among as many as six or ten parties (including the Conference leader).
Conference (32 Party)
This feature permits a Station User (PS, Multiline Terminal, Single Line Telephone),
Attendant, or a Trunk Party to establish a Conference among as many as 32 Parties
(including the Conference Leader).
Two Conference methods are available:
Group Call and
Meet-Me Conference.
Group Call
This feature enables a Station User (PS, Multi-line Terminal, Single Line Telephone)
within the system or a Trunk Party to establish a Conference among as many as 32
Parties. It also enables a Station User to page a maximum of 31 Parties simultaneously,
excluding the Conference Leader.
Three Group Call methods are available:
Group Call - Automatic Conference,
Group Call - Broadcasting and
Group Call - 2-Way Calling.
Group Call - Automatic Conference
This feature enables a Station User to establish a Conference among as many as 32
Parties. From a station or Attendant, a maximum of 31 Stations/Trunks can be paged
simultaneously except the Conference Leader. The Paged Stations/Trunks are assigned to
the simultaneous Paging Groups as participants by the System Data beforehand.
Group Call - Broadcasting
This feature enables a Station User to page a maximum of 31 Parties simultaneously
except the Group Call Leader. After Paged Parties answer, the leader can speak to the
Paged Parties (the Paged Parties only hear the leader's voice). The Paged Stations/Trunks
are assigned to the simultaneous Paging Groups as participants by the System Data
beforehand.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 144
Advertisement
Table of Contents
