NEC SOPHO 2000 IPS User Manual page 168

between the Main Site and Remote Site, the Remote Site automatically changes over to a
survival mode and operates as a stand-alone system.
Reserve Power
This feature provides backup power from a 24V battery source in the event of a
commercial power failure.
Resident System Program
This feature provides the installers a simple procedure to have the system generate system
data according to the system hardware configuration, thereby providing immediate
operation and shorter programming time. When activated, the system scans hardware
configuration (such as line/trunk card slot location) and assigns system data (such as
extension numbers, trunk numbers, etc.) according to a predetermined generic program
assignment.
Return Message Schedule Display
This feature permits any station user to register his Return Schedule from his phone when
he leaves his desk or the premises, and have the Return Schedule displayed on a calling
Multiline Terminal with a Liquid Crystal Display (LCD) during his absence.
Room Cutoff
This feature allows the following types of terminals to temporarily restrict guest room
telephones from making unauthorized calls when guests are away from their rooms. This
feature allows the same restriction when the rooms are in Check Out status:
- Attendant Console
- Hotel/Motel (H/M) Front Desk Instrument
- Property Management System (PMS) terminal
- Guest room telephones using a special access code
There are two types of Room Cutoff conditions depending on the type of calls restricted.
- External Call Restriction: All outgoing calls from guest room stations are restricted in
the Room Cutoff status. (Only internal calls are available.)
- Toll Call Restriction: All toll calls from guest room stations are restricted during
Room Cutoff status. (Internal and local calls are available.)
Room Status
This feature provides the Hotel/Motel (H/M) Front Desk Instrument with a visual display
of the guest's room status. A supplementary print out (individual and summary) can be
provided.
Route Advance
This feature automatically routes outgoing calls over alternate facilities when the first
choice trunk group is busy. Users select the first choice route by dialing the corresponding
access code, and the equipment then advances through alternate trunk groups only if the
first choice is busy.
Save and Repeat
This feature allows a Multiline Terminal to save a specific dialed number and then redial
that number at a later time.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 168