Table of Contents
Advertisement
6.5.4 MATWORX
MATWorX is a Graphical User Interface (GUI) program that provides an efficient
method for maintaining the PBX database. This program contains extensive help files,
Usage Wizards and Tool Tips, with hyperlinks imbedded in the text. The hyperlinks
provide quick access to the appropriate Add-In modules. Add-In modules provide a user-
friendly, intuitive method for customizing the PBX database.
The MATWorX IPS version 7.0.0 offers many enhancements to make the configuration
of Remote PIMs over the IP network simpler. Enhancements related to the Remote PIM
over IP capability were one of the main focuses of this MATWorX IPS release. The
primary focus of these enhancements were in the following areas:
-
Display PBX Main Site and Remote Site information
-
When connecting to Remote Sites provide a warning message
-
Display accommodation states of extensions and trunks with site information
-
Office data conversion for Remote PIM over IP system FP/AP number expansion
(expand from00-31 to 00-63)
-
When connecting to a Remote Site that operates in normal mode the MATWorX
functions have been limited to avoid mistakes that could be made by the technician
6.5.4.1 PBX Configuration Wizard
The PBX Configuration Wizard is a custom tool in MAT WorX that enables you to
establish the proper communication settings between your computer and the SOPHO
2000 IPS. The Wizard asks you simple questions and then uses the information to
automatically configure the connection for the PC and the PBX.
6.5.4.2 MACH Script Editor
This is a powerful timesaving tool that enables you to create a list of SOPHO 2000 IPS
commands that perform tasks in the PBX. This list is referred to as a script, which can be
saved and run at anytime. You can also use the MACH Script Editor to perform many
other operations.
Service conditions:
1. MATWorX can be used with any standard Windows PC. The PC used with
MATWorX must have an RS-232C port, and cannot be located more than 15m from
the system when connected on premises.
2. MATWorX can be connected to the system either directly or remotely. Direct
connection is through the RS connector on the MP card. The MAT CA-T cable
connects MATWorX to the RS connector. Remote connection is available via either
an internal modem on the MP card or an external modem for high speed. Remote
connection via the internal modem is through the COT (Central Office Trunk) card.
Connection between the modem and the COT is accomplished through internal
switching of the TDSW. Remote connection via an external modem is through the MP
card.
3. The following functions can be performed from the MAT:
System, station, and trunk data entry, change, and copy.
Loading, saving, and verification of system data to and from a disk.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 204
Advertisement
Table of Contents
