NEC SOPHO 2000 IPS User Manual page 164

Direct Privacy Release
This feature allows a station user with a secondary appearance of another extension in the
system to access that extension when it is being used by someone else. This feature allows
for a simplified method for establishing a conference. In addition, this feature can be used
to emulate PC dialing, where a single line extension connected to a PC can appear on a
Multiline Terminal and be accessed by the Multiline Terminal user after the PC is
completed dialing.
Manual Privacy Release
This feature allows a Multiline Terminal user to enter a conversation on a busy line button
if the Multiline Terminal user already in the conversation allows them by releasing
Privacy.
Private Lines
Only a C.O. trunk assigned to that specific station is seized when a station user originates
an outgoing C.O. call or when an incoming C.O. call is terminated at the station
designated by Direct-In-Termination. In this manner, stations and C.O. trunks are to be
associated on a 1-to-1 basis.
Property Management System Interface
The SOPHO 2000 IPS provides a data interface to a locally provided Property
Management System (PMS). This enables communication between the SOPHO 2000 IPS
and the PMS in order to provide computer control of Hotel/ Motel features.
Hotel/Motel Printer Service for IP-PMS (R11, R12.3)
This printout information can be used as an evidence of Hotel/Motel service set/cancel
activities. It is also useful for troubleshooting regarding the PMS interface.
In case of IP-PMS, below information regarding Hotel/Motel service can be automatically
output to a Hotel/Motel Printer connected to AP00 card:
- Automatic Waku-Up Set/Cancel
When Automatic Wake-Up feature is set/canceled from a guest station or an
administrative terminal (Dterm Front Desk Terminal, DSS Console, Desk Console or
PMS terminal), date & time, guest station number and wake-up time are printed out
(Setting/canceling station number or terminal type is also printed out when the feature
is set or canceled from the administrative terminal)
- Automatic Wake-Up Result
When Automatic Wake-Up feature is executed, the result of the wake-up feature is
printed out (Start Ringing, Answered, No Answer, Busy or Incomplete).
- Do Not Disturb Set/Cancel
When Do Not Disturb feature is set or canceled from a guest station or an
administrative terminal, date & time and guest station number are printed out
(Setting/canceling station number or terminal type is also printed out when the feature
is set or canceled from the administrative terminal)
- Message Waiting Set/Cancel
When Message Waiting feature is set or canceled from an administrative terminal,
date & time, guest station number, and setting/canceling station number (or terminal
type) are printed out.
- Room Cut-Off Set/Cancel
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 164