Table of Contents
Advertisement
CHAPTER 3 TERMINALS
5.2.3 CCIS over ISDN (event driven)
ISDN PRI (30PRTA) or BRI (4BRTA) cards and a CCIS channel handler (SPN-SC00
CCH-D) card are required per site connected. In the PRI card 29 voice channels remain,
in the BRI card 3.
When building a point-to-point network, the maximum number of connections to remote
locations is 8 per system.
5.2.4 CCIS over IP
This requires the same cards as for IP terminals, i.e. IP-PAD and VCT.
5.2.5 Overview of CCIS features
Attendant Camp-On With Tone Indication - CCIS
This feature permits the Attendant; when the desired station at another switching office is
busy, to hold an in-coming call in a special waiting mode. A distinctive Camp-On tone is
sent to the busy station when the Attendant sets Camp-On. When that station becomes
idle, it is automatically rung and connected to the waiting trunk party.
Attendant Controlled Conference - CCIS
This feature permits an Attendant (2400 IPX) to establish a conference, through CCIS,
with up to eight parties of stations and/or trunks (inside and outside parties).
Automatic Recall - CCIS
This service feature works as a time reminder. When an Attendant-handled call through
CCIS remains on hold, camped-on, or ringing unanswered for a fixed interval, the
Attendant is automatically alerted.
Brokerage - Hot Line - CCIS
This feature provides a ringdown connection between two stations, each using a Multiline
Terminal, in different offices in the CCIS network.
Busy Lamp Field (BLF) - CCIS
This feature provides a busy status indication of the predetermined stations within the
CCIS network. The visual indication is provided with a red LED associated with each
DSS button on the DSS/BLF Console and Multiline Terminal. Pressing the DSS button
allows a direct access to the preprogrammed station within the CCIS net-work.
UNIVERGE NEAX 2000 IPS General Description
Page 182
Issue 5
Advertisement
Table of Contents
