960051151013
960051151061
960051151060
960051151065
960051151043
960051151044
960051151003
960051151002
960051151039
960051151038
960051104627
960051104628
960051151029
960051151008
960051151031
960051151032
960051151004
UNIVERGE NEAX 2000 IPS General Description
Issue 5
48-TW-0.7 CONN CA
AC CORD-B- A
AC CORD-D-EU
AC CORD-D-UK
AC CORD-E-E
AC CORD-E-UK
BATT CA EXT
BATT CA INT
BATT CA-P5
BUS-0.4 CA-PA
till
11
12.3
BUS-0.4 CA-X
12.3
BUS-0.4 CA-CHG
MAT CA-T
PWR CA-A
PWR CNT CA-D
PWR CNT CA-E
RS NORM-4S CA-A
X
-
- AC Power Cord;
• Connects to AC240 V (60 Hz) via power distribution
board.
• Wires FG, Neutral and Line to terminals in the Base
Unit.
X
-
- AC Power Cord - connects to AC240 V (60 Hz) via
power distribution board
Wires FG, Neutral and Line to terminals in the Base
Unit.
X
-
- AC Power Cord - connects to AC240 V (60 Hz) via
(CEE Euro standard) connector.
Wires FG, Neutral and Line to terminals in the Base
Unit.
X
-
- AC Power Cord - connects to AC240 V (60 Hz) via
UK standard connector.
Wires FG, Neutral and Line to terminals in the Base
Unit.
-
X
X AC cord for Europe
• Connects PW-131 to commercial power.
-
X
X AC cord for United kingdom
• Connects PW-131 to commercial power.
X
-
- Connects between PZ-PW126 and external batteries.
X
-
- Connects between PZ-PW126 and internal batteries
mounted in each PIM.
-
X
X Battery Cable for External Battery Back-Up
• Connects PW-131 or PZ-4PFT to External Batteries
• One BATT Cable is required for each PIM.
-
X
X Bus Cable for extension of bus in multiple PIM
configurations.
• One BUS Cable is required for two PIM configuration,
two BUS Cables are required for three PIM
configuration.
-
X
X Bus cable between new DM PIM (0.4m)
Replaces 960051151038 BUS-0.4 CA-PA
· RoHS-compliant
-
X
X Bus cable between old DM PIM(960051153001) and
new DM PIM (960051104540) (0.4m)
· RoHS-compliant
X
X
- MAT CABLE FOR LOCAL MAT 6.6ft. (2.0m)
•PC SIDE: 9PIN D-SUB
X
-
- DC Power Cable - 1.6 feet, 0.5 meters long
• Connects PZ-PW126 to PZ-PW126
• Used to connect PIM 0 to PIM 1, PIM 2 to PIM 3, PIM
4 to PIM 5, PIM 6 to PIM 7. Max 4 cables per system.
X
-
- Power Control Cable;
• Used to connect PZ-PW126 (in PIM1- PIM7) and
external batteries.
(INCLUDED WITH PIMMG)
X
-
- Power Control Cable;
• Connects between PIM 0 PZ-PW126 and Base Unit
(INCLUDED WITH PIMMH and BASE)
X
-
- AC Power Cord;
• Connects to AC240 V (60 Hz) via (CEE Euro
standard) connector.
• Wires FG, Neutral and Line to terminals in the Base
Unit.
CHAPTER 3 TERMINALS
Page 110