NEC SOPHO 2000 IPS User Manual page 163

CHAPTER 3 TERMINALS
Prior to R12.1, when a failed DID call (destination busy, no answer, etc.) is forwarded to
a Dterm attendant position in the night mode, the call is routed to the attendant position
and continues ringing at the attendant position. In R12.1 software, the failed DID call can
be routed to a night station, instead of ringing the attendant position.
No CID Call Routing
This feature allows designing a call terminating system based on the reason for absence of
calling party number received from the network.
Off-hook Alarm
This feature allows a station user to call the Attendant, or a pre-designated station, by
simply staying off-hook for a preprogrammed period of time. The calling number is
automatically displayed at the Attendant Console, or the pre-designated station if
equipped with an LCD.
Off-Premises Extensions
This feature allows the connection of a single line telephone in an off-premises location.
The connection to the Off-Premises Extension can be through direct copper or through the
local telephone company.
Open Application Interface (OAI)
Provides a computer-to-PBX interface, allowing a computer to control the function of the
SOPHO 2000 IPS. See separate chapter for OAI features.
Pad Lock
This feature temporarily restricts telephones from making unauthorized calls by dialing
special access code when station users are away from their seats.
Periodic Time Indication Tone
This feature provides a periodic tone to the station user who has made an outgoing call.
This feature can be allowed or denied for each station.
Pooled Line Access
A line key can be assigned to access Pooled Lines. Each line key will allow incoming,
outgoing, or both-way access to a trunk route.
Power Failure Transfer
This feature provides for specified trunks to be automatically connected to designated
Single Line Telephones in the event of AC power loss. It is normally used when the
system is not equipped with reserve power.
Priority Call
This feature allows the Attendant to answer a call before other calls, at the Attendant's
discretion.
Privacy
This feature restricts Multiline Terminal users from depressing a busy line button and
entering a conversation unless permitted by the Multiline Terminal user currently on that
line button or if the line button is assigned for Direct Privacy Release.
UNIVERGE NEAX 2000 IPS General Description Page 163
Issue 5