NEC SOPHO 2000 IPS User Manual page 157

CHAPTER 3 TERMINALS
 Voice Mode: allows an incoming call to terminate with Voice Announcement.
 Tone Mode: allows an incoming call to terminate with ringing.
Internal Zone Paging with Meet-Me
This feature allows the Attendant Console and system users to page over the built-in
speakers of the Multiline Terminals within the assigned zone or all zones.
IP Enabled Dterm
This feature provides a Dterm Series E/Series i terminal, if equipped with an IP adapter
unit with a capability to provide a converged infrastructure at the desktop, with a 10Base-
T/100Base-TX Ethernet connection to corporate Local Area Networks (LAN). The IP
Enabled Dterm can communicate with other IP Enabled Dterm and CCIS network (IP
based) on a peer-to-peer connection basis. And, the IP Enabled Dterm also communicates
with legacy stations and trunks (TDM based) via IPPAD (IP Packet
Assembler/Disassembler). The IP Enabled Dterm provides users with all features
currently available in Dterm Series E/Series i terminals.
Last Number Redial
This feature allows users to redial the last station-to-station or outside number they dialed
using a feature access key or a feature access code. This is useful when the called station
is busy or does not answer.
Least Cost Routing - 3/6 Digit
This service feature allows the SOPHO 2000 IPS to be programmed to route outgoing
calls over the most economical facility (WATS, FX, DDD). Based on the individual area
code and office code dialed (6-digit analysis), the system examines the programmed
tables and uses the trunk in the order specified.
Line Lockout
This feature automatically releases a station from the common equipment if the station
remains off-hook for longer than a programmed interval before dialing. Howler tone may
be programmed to be sent to the station in Line Lockout.
Line Pre-selection
This feature provides the station user with two ways to select an idle, held, recalling, or
ringing line before going off-hook.
Maid Status
This feature allows the Hotel/Motel (H/M) Front Desk Instrument, Property Management
System (PMS) terminal, or guest room station (using special access code) to register the
condition of each guest room.
Maintenance Administration Terminal (MAT)
The Maintenance Administration Terminal (MAT) is a personal computer that provides
an interface to the PBX via the system's CPU card. The MAT PC must have the
MATWorX program properly installed to communicate with the PBX. MATWorX is
required for system software registration and activation. MATWorX is a Graphical User
Interface (GUI) program that provides an efficient method to manipulate the PBX
database. This program contains extensive help files, Usage Wizards and Tool Tips, with
hyperlinks imbedded in the text. The hyperlinks provide quick access to the appropriate
UNIVERGE NEAX 2000 IPS General Description Page 157
Issue 5