NEC SOPHO 2000 IPS User Manual page 155

This feature allows a Multiline Terminal/Single Line Telephone to page a maximum of
fifteen parties simultaneously including the originator. After one of paged parties
answers, the paging becomes the 2 Way Calling between the originator and the first
answered party, automatically stops paging other parties. The stations are assigned to the
simultaneous paging groups as participants by the system data beforehand.
Group Call by Pilot Number Dialing
This feature allows a Station User (Multi-line Terminal/Single Line Telephone/PS) or a
Trunk Party to page a group of Stations simultaneously by dialing a Pilot Number. The
maximum of 32 Stations can be assigned to a Paging Group, and the Paging Group is
associated with the Pilot Number. After one of the Paged Stations answers, the paging
becomes a 2-Way calling between the Calling Party and the first answered Station and
automatically stops paging other Stations.
Group Listening
When a Multiline Terminal user makes a call using the handset, pressing the SPKR key
will allow others to listen through the built-in speaker of the Multiline Terminal. The user
may continue talking on the handset at the same time.
Hands-free Answerback
This feature allows the station user to answer a voice call without lifting the handset.
Hands-free Dialing and Monitoring
This feature allows the station user to dial or monitor a call without lifting the handset.
Hold
This feature permits a user to Hold a call in progress. After Hold has been set, the station
user can make or answer new calls.
Call Hold
This feature permits a user to Hold a call in progress by sending a hookflash and dialing
the Call Hold feature access code, or by pressing the Call Hold key. This line can then be
used for originating another call or returning to a previously held call.
Dual Hold
This feature permits a station user who is placed on Hold by another station to place that
station on Hold also.
Exclusive Hold
This feature allows a Multiline Terminal user to place a call on Hold and to exclude all
other station users from retrieving the held call.
Non-exclusive Hold
This feature allows a Multiline Terminal user to place a call on Hold that may be retrieved
by any station that has an appearance of the held line.
Hotel/Motel Attendant Console
The Attendant Console can be programmed to function as a Hotel/Motel Attendant
Console. In addition to the business features and functions of the Attendant, the
Hotel/Motel Attendant Console can set Room Cutoff (individual and group), Automatic
Wake Up, Message Waiting, and Do Not Disturb (individual and group).
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 155