NEC SOPHO 2000 IPS User Manual page 92

12NC
960051151428
960051102788
960051 104895
960051151435
960051104896
960051151492
UNIVERGE NEAX 2000 IPS General Description
Issue 5
Description
upto
SPN-CP24B MP(PBC)
SPN-CP24C MP (PBC)
upto
SPN-CP24D MP (PBC) 12.1 X
SPN-CP27 A MP (PBC)
12.1 X
SPN-CP27B MP(PBC)
PZ-M606-A
X X - MAIN PROCESSOR: One card required per system.
9
• CPU: AMD Elan SC520 Pentium Equivalent
• Memory: (FROM=8MB, SDRAM=32MB)
• Built-In Functions; ¾ Pty CFT =16, DTG, PB
Senders=32, RS232C = 2 PORTS at 38.4kbps,
DK=1, SYSTEM CLOCK, Hold Tone Selectable
Internal Melody or External Source (1 Jack/input),
4PBR, 2DAT Circuits, FP0 function. PZ-M537
Memory Expansion, DRS function, AP01 & CC01
w/M606. Major and Minor Alarm indications
• PLO: PORT (MASTER/SLAVE)
• MODEM: 33.6 kbps Internal
• Registration: CPU and software required
10 X X - Main Processor for IPS
• Provides expanded memory for Remote Software
11
Download in R10 software
(CP24B: FROM=8MB, SDRAM=32MB,
CP24C: FROM=16MB, SDRAM=64MB)
• Provides same built-in functions as SPN-CP24B MP
X - Main Processor for IPS
• Same functionality as SPN-CP24C MP (PBC) except
number of music source(8) Note1
• R11 or earlier software cannot be worked with this
card.
• RoHS-compliant
Replaces SPN-CP24C MP(PBC)
X - - MAIN PROCESSOR for Dual MP used in PIMMH.
Two cards required per system.
• CPU: AMD Flan SC520 Pentium Equivalent
• Memory: (FROM=8MB, SDRAM=32MB), Key ROM.
• Built-In Functions; ¾ Pty CFT =16, DTG, PB
Senders=32, RS232C = 2 PORTS at 38.4kbps,
DK=1, SYSTEM CLOCK, Hold Tone Selectable
Internal Melody or External Source (1 Jack/input),
4PBR, 2DAT Circuits, FP0 function. PZ-M537
Memory Expansion, DRS function, AP01 & CC01
w/M606, FP0.
• PLO: PORT (MASTER/SLAVE)
• MODEM: 33.6 kbps Internal
• Registration: CPU and software required
- - Main Processor for IPS Backup MP system
• Same functionality as SPN-CP27A MP (PBC) except
number of music source(8) Note1
• R11 or ealier software cannot be worked with this
card.
• RoHS-compliantReplaces SPN-CP27A MP(PBC)
X X X Ethernet Control Daughter card
• Optionally mounts on CP24, CP27 and CP31. MP
cards to accommodate Ethernet and transmit/receive
TCP/IP protocol. Required for OAI, Peer-Peer IP and
TCP/IP MAT.
• 10 BASE-T/100 BASE-TX twisted pair cable is
connected directly to this card via RJ45 connector.
CHAPTER 3 TERMINALS
Function
Page 92