Table of Contents
Advertisement
This feature allows Name Assignment for a DID Number received from a Public
Network, and displays the name on an LCD of a Multi-line Terminal or Attendant
Console.
Direct Inward System Access (DISA)
This feature allows an outside caller to access the system using an exchange network
connection without Attendant or station assistance. The outside user may originate calls
over any or all of the system's facilities such as WATS, FX, Tie Line or CCSA. The
outside user can also directly call stations and access miscellaneous trunks for such
features as dictation access.
Call Forwarding set by DISA
This feature allows an outside caller to set Call Forwarding – All Calls Direct Inward
System Access (DISA) code.
Direct Inward Termination (DIT)
This feature automatically routes incoming network exchange calls directly to a pre-
selected station without Attendant assistance. The call can then be processed by the called
party. Three-party Conference, Call Transfer, etc., are handled in the same manner as any
normal trunk call.
Direct Outward Dialing (DOD)
This feature permits any station user the ability to gain access to the exchange network by
dialing an access code and receiving new dial tone. The user may then proceed to dial the
desired exchange network number.
Direct Station Selection/Busy Lamp Field (DSS/BLF) Console
This feature allows a Direct Station Selection/Busy Lamp Field (DSS/BLF) Console to be
associated with a legacy Multiline Terminal. When the buttons on the DSS/BLF Console
unit are programmed for Direct Station Selection (DSS) buttons, up to 60 stations can be
directly accessed in addition to those already appearing on the Multiline Terminal. Busy
status for each station is indicated by a red LED associated with each button. In addition,
the DSS console can provide the following functions:
Message Waiting - Set/Cancel/Status Display
Do Not Disturb - Set/Cancel/Status Display
Automatic Wake Up No Answer - Status Display/Cancel
Agent Busy Out - UCD - Status Display
Line Lockout - Status Display
Room Cutoff - Set/Cancel/Status
Busy Out Status Console
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be
used as a Busy Out Status Console. This feature is activated by use of a Function Mode
key on a DSS/BLF Console. Busy Out Status for each station is indicated by a red LED
associated with each button.
Do Not Disturb Console
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be
used as a Do Not Disturb (DND) Console. This feature is activated by the use of a
Function Mode key on a DSS/BLF Console. DND set status for each station is indicated
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 148
Advertisement
Table of Contents
