Table of Contents
Advertisement
by a green LED associated with each button. In addition, the Multiline Terminal user can
set/cancel the DND status of other stations using the DND Console.
Message Waiting Console
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be
used as a Message Waiting (MW) Console. This feature is activated by the use of a
Function Mode key on a DSS/BLF Console. The Message Waiting status for each station
is indicated by a green LED associated with each button. In addition, the Multiline
Terminal user can set/reset MW status using the MW Console.
Room Cutoff Console
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be
used as a Room Cutoff Console. This feature is activated by the use of a Function Mode
key on a DSS/BLF Console. The Room Cutoff status for each station is indicated by a
green LED associated with each button. In addition, the Multiline Terminal user can
set/cancel Room Cutoff to another station using the Room Cutoff Console.
Wake Up No Answer Console
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be used
as a Wake Up No Answer (WU) Console. This feature is activated by a function mode
key on a DSS/BLF Console. The No Answer status for each station is indicated by a
flashing green LED associated with each button.
Distinctive Ringing
This feature provides Distinctive Ringing patterns to the station so that the station user
can distinguish between internal and external incoming calls. This feature also enables the
LED associated with the line key of the Multiline Terminal to flash in two colors
according to the kind of incoming call.
Do Not Disturb
This feature restricts incoming calls to a station and can be set by an individual station or
from the Attendant Console. Placing a station in Do Not Disturb (DND) does not prevent
a station from originating a voice or data call or from receiving a data call. This feature
also allows a station to ensure privacy from telephone interruptions while on an outgoing
call. Additionally, the Attendant Console can place a group of stations in the Do Not
Disturb condition.
Do Not Disturb – Group (R8)
Previously Do Not Disturb was only available to be set by the individual Dterm users.
The R8 enhancement allows the system to schedule set/cancel Do Not Disturb feature for
a group of stations at pre-programmed times. The system has up to four timetables; each
timetable has time to set/cancel Do Not Disturb for seven-day period (Sunday-Saturday)
and 24 hours a day in 5-minute increments. Different timetables can be assigned for
specific dates of the year.
-
DND status can be indicated by led associated with "DND" function key programmed
on a Dterm or DSS/BLF Console.
-
Pressing the associated DND function key or the DSS/BLF key to set/cancel the DND
feature will have no effect if the station is set to DND Group.
-
The DND status set by DND Group can be temporarily changed on a individual
station basis by dialing the DND feature set/cancel code or by the Attendant Console
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 149
Advertisement
Table of Contents
