NEC SOPHO 2000 IPS User Manual page 131

The LCD on Multiline Terminals is used to provide alphanumeric information including
clock/calendar and call processing information. Station Application All Multiline
Terminals with an LCD display.
Analog Port Adapter
This feature allows an Analog Port Adapter unit combined with a legacy Multiline
Terminal to connect to an analog terminal such as an analog telephone, Modem, and PC
with built-in Modem. There are two communication modes for the terminal connected via
the Analog Port Adapter as shown below:
1. Single Port Mode
A Multiline Terminal and an analog terminal share the same port. In this mode,
the Multiline Terminal and the analog terminal cannot be used simultaneously.
2. Dual Port Mode
A Multiline Terminal and an analog terminal use different ports. In this mode, the
Multiline Terminal and the analog terminal can be used simultaneously.
Analog Station CLI-FSK (R10)
This feature provides calling party number before answering incoming calls. It allows the
system to connect analog telephones with Caller ID display function as PBX stations, and
provides the calling party number on the display when terminating incoming calls. The
calling party number information is transmitted to the called telephone using Frequency
Shift Key (FSK) signals based on ETSI EN300 659, off-hook data transmission during
ringing. When the calling party number does not exist, the Reason for Absence of the CLI
is displayed.
Required Software and Hardware:
- PN-4RSTH
- PN-4LLCB
- PZ-PW122
Announcement Service
This feature allows station users to record messages on Digital Announcement Trunk
(DAT) cards. When a station user dials the feature access code for this feature, the user
receives the corresponding message from the system. Also Announcement Service can be
used to provide a voice message in the following cases;
 An incoming C.O. line/Tie line call has been transferred and encounters a busy or no
answer condition
 An incoming DID line/Tie line call has been terminated to a station and encounters a
busy or no answer condition
 Internal Recorded Message in place of Music on Hold
 Night Announcement
Answer Key
An Answer Key is provided on all Multiline Terminals. The Answer Key can be used to
answer incoming calls on outside lines, and primary or secondary extensions. When the
Answer Key is used to answer an incoming call with a call in progress, the first party is
placed on hold and the second party is connected. If the Answer Key is depressed while in
a three-party call, the user can alternate between each party and a Broker's Call is
established.
Attendant Assisted Calling
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 131