NEC SOPHO 2000 IPS User Manual page 162

When the Attendant Console is in Night Service, any operator directed calls (dial 0 calls)
are automatically routed to a preprogrammed station. Priority Calls and Off-Hook Alarms
which terminate to an Attendant are also routed by this feature.
Call Rerouting
This feature provides flexible reroute capabilities for a variety of calls when the system is
in night mode.
Day / Night Mode Change by Attendant Console
This feature provides activation of DAY/NIGHT Mode Change by depressing a
predetermined key from the Attendant Console.
Day / Night Mode Change by Station Dialing
This feature allows selected stations to activate a change from day mode to night mode by
dialing a special code.
Day/Night Mode Change by System Clock
This feature provides automatic activation of Day/Night Mode Change by using System
Clock.
Night Connection - Fixed
This feature allows incoming calls normally terminated to the Attendant to reroute to a
predetermined station when the system is placed in Night Service.
Night Connection - Flexible
This feature provides incoming calls normally terminated to the fixed night station to be
Call Forwarded to another station.
Trunk Answer Any Station (TAS)
This feature allows any station, other than one with incoming restrictions, to answer
incoming calls when the system is in the night mode. When this feature is activated,
incoming exchange network calls will activate a common alert signal at the customer
premises. By dialing a specified code, any station may answer the call and then extend it
to any other station by means of the Call Transfer feature.
Overflow for TAS Queue
If the TAS Call is not answered by predetermined time, the call will be forwarded to
predetermined Station/Attendant Console/Announcement Service.
Queue Limit for TAS
When a DID Call is converted to TAS and the number of used Lines reaches queue limit,
this feature provides the system to restrict the next call terminating.
Night Service: Failed DDI Calls to a Night Station (R11)
Prior to R11, a night station can answer failed DID calls (destination busy, unanswered or
not existing number) when the Desk Console is switched to night mode, but not failed
DID calls (destination Do Not Disturb). In R11 software, the night station can answer
failed DID calls with destination setting Do Not Disturb. This feature is available only in
a standalone configuration.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 162